Origami metamaterials show reversible auxeticity combined with deformation recoverability


Several metamaterial prototypes at different scales, which were miniaturized at the micron scale using two-photon direct laser writing. Credit: Allison L. Carter, Georgia Tech

The simplicity and elegance of origami, an ancient Japanese art form, has motivated researchers to explore its application in the world of materials.

New research from an interdisciplinary team, including Northwestern Engineering’s Horacio Espinosa and Sridhar Krishnaswamy and the Georgia Institute of Technology’s Glaucio Paulino, aims to advance the creation and understanding of such folded structures for applications ranging from soft robotics to to energy harvesters.

Inspired by origami, with mechanical properties defined by their structure rather than their composition—have gained considerable attention because of their potential to yield deployable and highly tunable structures and materials.

What wasn’t known was which structures integrate shape recoverability, pronounced directional mechanical properties, and reversible auxeticity—meaning their lateral dimensions can increase and then decrease when progressively squeezed. Though some 3-D origami structures have been produced through additive manufacturing, achieving the folding properties displayed in ideal paper origami remained a challenge.

Using nanoscale effects for an origami design, the team of researchers from the McCormick School of Engineering and Georgia Tech sought to answer that question. They produced small, 3-D, origami-built metamaterials, successfully retaining the best properties without resorting to artifacts to enable folding.

“The created structures constitute the smallest fabricated origami architected metamaterials exhibiting an unprecedented combination of ,” said Espinosa, the James and Nancy J. Farley Professor of Manufacturing and Entrepreneurship and professor of mechanical engineering and (by courtesy) biomedical engineering and civil and .

“Our work demonstrated that rational design of metamaterials, with a large degree of shape recoverability and direction-dependent stiffness and deformation, is possible using origami designs, and that origami foldability enables a state where the material initially expands and subsequently contracts laterally (reversible auxeticity),” added Espinosa, who serves as director of Northwestern’s Theoretical and Applied Mechanics graduate program. “Such properties promise to influence a number of applications across a wide range of fields encompassing the nano-, micro-, and macro-scales, leveraging the intrinsic scalability of origami assemblies.”

“Guided by geometry, the scaling and miniaturization of the origami metamaterial are exciting in itself and by the unprecedented multifunctionality that it naturally enables,” said Paulino, the Raymond Allen Jones Chair at Georgia Tech’s School of Civil and Environmental Engineering.

“Only an interdisciplinary effort combining origami design, 3-D laser printing with nanoscale resolution, and in situ electron microscopy mechanical testing could reveal the unprecedented combination of properties our work demonstrated and their potential impact on future applications,” added Paulino, who contributed to establishing the National Science Foundation Emerging Frontiers in Research and Innovation program named ODISSEI (Origami Design for Integration of Self-assembling Systems for Engineering Innovation).

“Just like nature has architected a wide range of structures using just a few material systems, origami allows us to engineer resilient structural components with distinct physical properties along different directions,” said Krishnaswamy, professor of mechanical engineering.

“We can envision origami-based soft microrobots that are stiff along some directions to carry payloads while maintaining other degrees of flexibility for motion. Origami-metamaterials that exploit reversible auxeticity and large deformation can lead to multifunctional applications ranging from deployable microsurgical instruments and medical devices, to energy steering and harvesting,” added Krishnaswamy, the director of Northwestern’s Center for Smart Structures and Materials.

The study presents new avenues to be explored long term, Espinosa said.

“There are a number of possibilities,” he said. “One is the fabrication of structures with ceramic and metallic materials, while preserving nanoscale dimensions, to exploit size effects in the mechanical response of the structures leading to superior energy dissipation per unit volume and mass. Another is the use of piezoelectric polymers, which can result in energy harvesters that can drive sensing modalities or power microsurgical tools.”

The research, “Folding at the Microscale: Enabling Multifunctional 3-D Origami-Architected Metamaterials” was published in Small on July 27.


A model for the origami-inspired folding of a tubular waterbomb


More information:
Zhaowen Lin et al, Folding at the Microscale: Enabling Multifunctional 3D Origami‐Architected Metamaterials, Small (2020). DOI: 10.1002/smll.202002229

Journal information:
Small

Citation:
Origami metamaterials show reversible auxeticity combined with deformation recoverability (2020, July 27)
retrieved 27 July 2020
from https://techxplore.com/news/2020-07-origami-metamaterials-reversible-auxeticity-combined.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.



Source link